| need parts and driver mods | |
|
|
Author | Message |
---|
Futurama
Posts : 376 Join date : 2008-11-12 Age : 44 Location : ft worth texas.
| Subject: need parts and driver mods Mon May 11, 2009 12:14 am | |
| need some help guys. need a corner left side tailight. a speedo cable and driver mod. turns out i was right about it being me that has been keeping the car slow. buddy took it out tonite with me and i let him make a pass, i ran 8.1with a 1.7 60ft @86mph. he ran a 7.42 at 95mph, on his first pass with the car, and a lousy 1.79 60ft. it has a good amount left in it im sure. so ya anyway i used to drive the shit out out of my old 95gt. but i cant drive as well now that i have to take all these pills. at least thats my excuse because today after alot of practice i couldnt even run a 7, any advice? | |
|
| |
Stymees'mont
Posts : 406 Join date : 2008-11-08 Age : 51 Location : Minnesota
| Subject: Re: need parts and driver mods Mon May 11, 2009 7:37 pm | |
| Give yourself some time. Figure out what your buddy is doing different then you....maybe go for a ride with him and watch everthing he does. Its kinda hard to help without beening there as it all happens. | |
|
| |
Futurama
Posts : 376 Join date : 2008-11-12 Age : 44 Location : ft worth texas.
| Subject: Re: need parts and driver mods Mon May 11, 2009 10:38 pm | |
| its my shifting man, specifically my 2-3rd shift. i dont know, maybe i need a different shifter, i use to be fine with a steeda tri-ax but now i huve a hurst shifter because i thought it would be old school. but maybe its time for a change back | |
|
| |
Stymees'mont
Posts : 406 Join date : 2008-11-08 Age : 51 Location : Minnesota
| Subject: Re: need parts and driver mods Mon May 11, 2009 10:45 pm | |
| Could be, is the throw a lot different ? | |
|
| |
Futurama
Posts : 376 Join date : 2008-11-12 Age : 44 Location : ft worth texas.
| Subject: Re: need parts and driver mods Mon May 11, 2009 11:30 pm | |
| yup i mean is has to be if i was good with one and bad with this hurst. | |
|
| |
Futurama
Posts : 376 Join date : 2008-11-12 Age : 44 Location : ft worth texas.
| Subject: Re: need parts and driver mods Mon May 11, 2009 11:31 pm | |
| | |
|
| |
Stymees'mont
Posts : 406 Join date : 2008-11-08 Age : 51 Location : Minnesota
| Subject: Re: need parts and driver mods Tue May 12, 2009 5:57 pm | |
| Not really, just wonder if you need one with a short throw. Less swing would help any guy out. | |
|
| |
Aug
Posts : 225 Join date : 2008-11-18 Location : Altoona, PA, USA
| Subject: Re: need parts and driver mods Wed May 13, 2009 3:46 pm | |
| I got a B&M Ripper. The springs are heavy enough that if I take the heel of my hand and smack it as hard as I can from behind, it still makes it from 2 to 3. | |
|
| |
Sponsored content
| Subject: Re: need parts and driver mods | |
| |
|
| |
| need parts and driver mods | |
|